About Product Technologies
- What is the difference between a waterproof junction box and an electrical sealed box?There are various types of waterproof junction boxes, which can be used to install various DIN rail components. The high quality waterproof junction box has high impact strength, because it is injection molded with ABS or PC thermoplastic engineering plastics, and there are wall fixing holes in theAbout Product Technologies January 22, 2019
- Brief introduction of IP67 Test method for Protection ClassStandard Test method for Protection Class according to EN60529:2000Experimental conditions for the first eigenvalue 6Vacuum test of IP6X dust and air mixture against invasion of foreign solid matter.Vacuum: < 2kpa (20mbar)Experimental time: 8 hoursExperimental dust: talc powderParticle diameter distAbout Product Technologies January 22, 2019
- Waterproof junction box should be considered in the selection and design of materials1. Material selection: The main application areas of the current waterproof junction box products are on-site and open-air sites with relatively harsh environments. When considering the safety performance of the product, consideration should be given to the impact resistance, static load strength, nAbout Product Technologies January 22, 2019
- Classification of cable connector productsAccording to the installation site, it can be divided into indoor and outdoor.According to the production and installation materials, it is divided into heat-shrinking type (*common type), dry-pack type and epoxy resin casting type, and cold-shrinking type.According to the core material, it can be dAbout Product Technologies January 22, 2019
- Cable glandsCable connectors are also called cable ends. After the cable is laid, in order to make it a continuous line, each line must be connected as a whole. These connection points are called cable joints. The cable joint in the middle of the cable line is called the intermediate joint, and the cable jointAbout Product Technologies January 22, 2019
- Function of cable glands connectorThe main function is to make the line unobstructed, keep the cable sealed, and ensure the insulation level at the cable joint to make it run safely and reliably. If there is no seal or the seal is not good, not only will the oil leak and the oil invade the paper, but the gas will also invade the inside of the cable, causing its insulation performance to drop.About Product Technologies January 21, 2019